How about the lifting system of the pole lamp? What are the hard indicators required?

Light, this kind of equipment in any one place is our most common, because this kind of equipment basically appear in every corner of the city or the countryside, you can see when we walked in the market of the main street, there are some light, shadow, do you know how much of the rise and fall of the whole equipment system, each person may for this kind of device has its own some opinions, for now the rise and fall of the whole equipment system must also is different.

(1) The lifting system of the high pole light equipment can adopt the built-in independent electric coil plant mechanism to carry out practical processing, the whole field mechanism is equipped with a special locking device, and can be operated in various aspects through the distance of 5 meters away from the hole.

(2) high lamp equipment tools can completely and hoist is equipped with adjustable between independent torque limiter, and through this kind of equipment to prevent overload, the entire device can use electric hoist, but also by way of electric point, forging cracking requirements can do manual operation, but we must especially pay attention to in the middle of the operation process.

(3) The lifting system of the high pole lamp should adopt high flexible stainless steel wire rope, requiring that all design safety factors should not be less than 6, all the production institutions in the process of operation had better be able to set up the whole equipment, falling off device to ensure that all the steel wire in the fracture at the same time timely stuck not falling off.

Through some of the above introduction, I believe that most of the people must also be very concerned about the high pole light lifting system, then such a device lifting system can be fully through the adjustable way to experience the actual, effectively achieve the desired height.